User Tools

Site Tools


banjo_kazooie:model_data

This is an old revision of the document!


Model Data

Banjo-Kazooie uses a file-system in which most resources are packed into file blocks throughout the ROM, and are unpacked into RAM when needed. Among these are the model files, each with their own syntax and load-lines. This page's purpose is to cover the syntax and properties of said model files.

Address Value/Syntax Description
0x00000000 [00 00 00 0B] START
0x00000004 [aa aa aa aa] Geometry Layout Offset
0x00000008 [bb bb cc cc] bb=Texture Setup Offset (Usually 00 38), cc=Geo Type*
0x0000000C [dd dd dd dd] Display List Setup Offset
0x00000010 [ee ee ee ee] Vertex Store Setup Offset
0x00000014 [00 00 00 00] ? - Pertains to hitboxes
0x00000018 [ff ff ff ff] Animation Setup
0x0000001C [gg gg gg gg] Collision Setup
0x00000020 [hh hh hh hh] Effects Setup End Address
0x00000024 [hh hh hh hh] Effects Setup
0x00000028 [00 00 00 00] ?
0x0000002C [jj jj jj jj] Animated Textures Offset
0x00000030 [kk kk ll ll] kk= Tri count, ll= vert count
0x00000034 [00 00 00 00] ?

*Geo Types: 0000=normal, 0002= Trilinear MipMapping (RGBA16), 0004=Env mapping, 0006=?


Texture Setup

Offset from TexSetup Start Value/Syntax Description
0x00000000 [aa aa aa aa] Amount of data in bytes to load (including command)
0x00000004 [00 cc 00 00] cc=Texture Count
0x00000008 [dd dd dd dd] Texture[i] segment address from texture data start
0x0000000C [00 ee 00 00 xx yy 00 00] Texture[i] ee =type*, xx yy=Pixel Grid
0x00000014 [00 00 00 00] Wasted data?

*Types: 01=CI4, 02=CI8, 04=RGBA16, 08=RGBA32, 0x10=IA8,

*External texture indices start at FileID 0x1EF6, 0 indexed.

Example: 00 00 06 00 00 01 00 00 40 40 00 00 00 00 00 00

This will load a CI4 64x64 texture from segmented address 0x600.

Display List Setup

Offset from DLSetup Start Value/Syntax Description
0x00000000 [aa aa aa aa 00 00 00 00] F3DEX Command Count
0x00000008 F3DEX F3DEX Display List

Vertex Store Setup

Offset from VTXSetup Start Value/Syntax Description
0x00000000 [aa aa bb bb cc cc] s16[3] Minimum Coords
0x00000006 [dd dd ee ee ff ff] s16[3] Maximum Coords
0x0000000C [gg gg hh hh ii ii] s16[3] Center Coords
0x00000012 [kk kk] s16 Largest Distance to Center
0x00000014 [ll ll] u16 Vertex Count*2
0x00000016 [mm mm] s16 Largest Distance to Origin

Each 16 byte line of the Vertex Setup following the Start denotes where a vertex is stored in 3D space, from where in 2D space its UVs begin being mapped, and which color and opacity alpha values will be applied to these vertices.

It is stored like this: [xx xx yy yy zz zz 00 00 uu uu vv vv rr gg bb aa]

Vertex Structure After Start Value/Syntax Description
0x00000000 [xx xx] *s16 Vertex Position on X Axis
0x00000002 [yy yy] s16 Vertex Position on Y Axis
0x00000004 [zz zz] s16 Vertex Position on Z Axis
0x00000006 00 00 Padding(?)
0x00000008 [uu uu] s16 UV Coordinates: U Axis
0x0000000A [vv vv] s16 UV Coordinates: V Axis
0x0000000C [rr] u8 Vertex Color Red Values
0x0000000D [gg] u8 Vertex Color Green Values
0x0000000E [bb] u8 Vertex Color Blue Values
0x0000000F [aa] u8 Vertex Color Alpha Values

*Please note that s16 refers to 'signed short'; a value which may be positive or negative and takes 16 bits of space. Positive signed values range from 0x0000 to 0x7FFF, negative signed values range from 0xFFFF to 0x8000. Whereas u8 refers to an 'unsigned byte' value that may only be a positive integer from 0x00 to 0xFF.

Example: 0014 0062 FFE7 0000 FFE0 0014 9292 92FF

A vertex will be drawn at position (20, 98, -25). UV mapping will begin at -20 coordinates in the U axis and 20 coordinates in the V axis. This vertex will feature a color of #929292 with full opacity alpha of 0xFF or 255.


Effects Setup

The Effects Setup for Level and Actor bins functions very similar in nature to that of the Effects Setup used in Banjo-Tooie only with fewer effects to use. Effects types only appear to go up to 10 types with several unknowns currently. Level models can have texture scroll, though actors and objects do not appear to have the same luxury. Some actors like Teehee & Twinklies have effects. There may be more at play that determines how effects are activated.

Offset from Effects Setup Value/Syntax Description
0x00 [aa aa] Effect Count
0x02 [bb bb] Data Start + Param
0x04 [cc cc] Vertex Count
0x06 [dd dd] Vertex Referenced from Vtx Store following Start

Effect IDs are

Data Start = 100*Type + Param  (decimal)

where param is used to control the speed or amplitude of the effect. For Data Start in the table, param used is 0 and can range from 0-63. Type is taken from

TypeData StartDescription
0 0x000 ??
1 0x064 Texture scrolling (along vertical axis). Param dictates speed [6A - Slow, 78 - Medium, A0 - Fast]
2 0x0C8 Flickering vertex color, for fake lighting around flames
3 0x12C Oscillating texture scrolling + vertical bob. Param affects bob height.
4 0x190 Seems to trigger geometry to move (possibilities include squash, move). Additional param will crash game.
5 0x1F4 Vertex color regularly gets brighter and dimmer. Param dictates speed of glow.
6 0x258 ??
7 0x2BC Rippling wave generation, amplitude controlled by bounding box of affected vertices, speed of wave dictated by param.
8 0x320 ??
9 0x384 Adds lightning sound effect, no visible change. Param does not seem to affect sound speed. Could be alpha related.

Example (GV Model A):

0003 0078 006A 0010 0011 0012 0013 0014 ... 0605 00AA 0015 06AC ... 06C0 0190 0007 0182 ... 018A 0000 0000 0000

Loads 3 effects, the first being 78 (Medium Scroll) with the full vertex count of the effect being 106 (6A) vertices. Verts in the bin that scroll range from vertex lines 16 (0010) to 122 (0605). The second effect in the bin is effect 00AA (fast scroll) with a 21 (15) vertex count ranging from vertex lines 1708 (06AC) to 1729 (06C0). The third effect in the bin is effect 0190 (??) with a 7 vertex count ranging from vertices 386 (0182) to 393 (018A). There is a 4 or 6 byte padding buffer at the end of most effects setups.


Animated Texture List

If the model's animated_textures_offset is non-zero, the animated texture list is an array of 4 of the following struct:

Offset Value/Syntax Type Description
0x00 [aa aa] i16 Frame size (bytes) : 0 if unused
0x02 [bb bb] i16 Frame count
0x04 [cc cc cc cc] f32 Framerate (fps)

Note only the 1st texture in the model can be animated, however it can be animated with 4 different framecounts/framerates. —

banjo_kazooie/model_data.1708301367.txt.gz · Last modified: 2024/02/19 00:09 by ThatCowGuy